Completing the Vanity

If you remember, we took an IKEA dresser drawer and hacked it into a vanity. One of the problems with this, is the drawers will not close because of the plumbing.

So "A" made the plan of how we can modify the dresser. In the end it was much easier than what I anticipated. We used a leftover piece of redwood that was the same thickness but was an inch shorter.

On the top drawer the sides had to be narrower and the middle piece needed to be shorter because of the sink.

The only tools needed was a tape measure, miter saw, jig saw, staple gun with compressor, and wood glue. It took less than two hours and that is with a lunch break.